SPC SW 4311-4314

Product Specification SPC SW 4311-4314 :

Product Specification :
DESCRIPTON | Testing Method | Unit | Shell 40 | Shell 45
Length | EN ISO 24342 | mm | 1219.2 | 1219.2
Width | EN ISO 24342 | mm | 183 | 183
Overall Thickness | EN ISO 24346 | mm | 4 | 4.5
Thickness of Wear Layer | EN ISO 24340 | mm | 0.3 | 0.5
Aperture between two planks | Filler gauge | mm | <0.13 | <0.13
Straightness | EN ISO 24342 | mm | <0.2 | <0.2
Squareness | EN ISO 24342 | mm | <0.2 | <0.2
Curling after exposure to heat | EN 434 | mm | “Averange of 3 Specimens<0.5mm(80C5h)” | “Averange of 3 Specimens<0.5mm(80C5h)”
Dimensional stability after exposure to heat (%) | EN 434 | – | “Averange of 3 Specimens<0.5mm(80C5h)” | “Averange of 3 Specimens<0.5mm(80C5h)”
Peeling stength of layer | EN 431 | – | >80N/5cm | >55N/5cm
Effect of castor chair | EN 425 | – | No disturbance to the surface | No disturbance to the surface
Abrasion Resistance | EN 660-2 | – | <0.015g/100wheels | <0.015/100wheels
Scratch-resitance | ISO 1518 | – | >2500g | 2500g (weights)
Glossiness | Gloss meter | +2gu | N/A
UV Adhesion | GBT9286 | – 100% | 100%
Click tensile strength | Electronic tension tester | 2G/240N/5cm | 2G/240N/5cm
Click tensile strength | Electronic tension tester | 5G/160N/5cm | 5G/160N/5cm
UV Coating | – | – | Diamond Core | Diamond Core
Residual Indentation | EN 433 | – | <0.03mm | <0.03mm
Color Fastness/Grade | EN ISO 105-B02 | Degree | >6 | >6
Fire Rating | EN 13501-1 | | Bfi-S1 | Bfi-S1
European Cliassification | EN 685 | | suitable | suitable
TOVC after 28 days | ISO 16000-6 | pg/m3 | <10 | <10